Vault C6 6″ Powered Studio Monitors Pair – Test

- 70 % Off

$10,433.70

Vault C6 6″ Powered Studio Monitors Pair – Test

Add to wishlist
SKU: HUX9Q5OLL8 Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Vault C6 6-Inch Powered Studio Monitors with Isolation Pads – Pair

Vault C6 6 Inch Active Professional Studio Monitor Speakers

 

The Vault Monitors are designed and tested by audio engineers to meet your needs in a studio monitoring environment. It is focused on the functional goal of delivering pure, original sound without any additional colouration regardless of the genre of music you listen to. They are self-powered, directly accepting a line-level signal from a variety of sources. Vault Monitors deliver a wide-range frequency response and use a unique crossover technology for a stable and balanced low-mid frequency response along with a defined mid and high-frequency range. For professional engineers at commercial studios to home studio owners, Vault Near-Field Monitors, set a whole new affordable standard in studio monitoring market.

Compare Vault C6 Powered Studio Monitors Spec for Spec vs. Other Bestsellers

 

Model Vault C6 M-Audio BX6 Carbon KRK RP6 RoKit G3
Price per Pair. ₹16,499/- ₹27,800/- ₹ 36,999/-
Warranty 3 Years 1 Year 1 Year
Speaker Size 6″ 6″ 6″
Tweeter Size 1.25″ Shielded 1.25″ Silk Dome 1″ Soft dome tweeter
Frequency Range 45-22Khz 45-22Khz 38-35Khz
Power Output 65 Watts 70 Watts 73 Watts
Bass Reflex Port Rear Rear Front
Magnetic Shielding X ✓ ✓
Manual Frequency Correction ✓ ✓ ✓
Auto Standby Function X X ✓

Kevlar driver

Vault C series monitors, Low-frequency drivers are made out of Kevlar which allows the speaker drivers to perform under pressure. Kevlar gives you that tight sound you seek in studio monitors.

 

 

Silk dome tweeter

The silk dome tweeters take care of reproducing high and upper-mid frequencies (treble) for the monitors, giving you crisp and clear high-frequency sound, making your music sound exceptionally good.

 

 

Acoustic room switch

The rear panel houses an acoustic room switch which allows you to tune your speakers to your room. If your setup is in a smaller space and the sound gets boomy, flip the switch to -4db and enjoy good quality sound minus the extra room resonance.

 

 

Multiple Input connections

C series monitors allow you to connect either an XLR input source or a line level source, choose from either to connect it to various output devices.

 

 

 

 

Free Acoustic Foam pads

Inside the box get a pair of acoustic foam pads to reduce vibrations produced by the speaker after kept on your desk. Place one monitor on each pad to enjoy clean music without any extra furniture vibrations.

 

 

 

Bajaao TRS to TRS Balanced Cable – 1.5 Meter – Pair

Bajaao XLR to TRS Balanced Cable – 3 Meter – Pair

Bajaao Cable uses Ultra High Clarity Connectors – the conductor is soldered directly to the tip with silver solder to maximize signal flow. This cable was designed for rugged stage use and to provide superior performance at a bargain price, with better sonic characteristics and performance than other cables in its class.Features

  • Oxygen-free stranded copper wire provides clarity and sonic accuracy
  • Subwoofer cable for connecting subwoofer speaker to a stereo receiver, sound system, or other compatible audio device
  • Expertly transmits low-frequency signals generated by subwoofers, ensuring exceptional sound quality and bass response
  • Maintain integrity even when bent, with a no-slip PVC Y-Boot and a durable, yet flexible nylon sheath. Pro-grade quality suitable for audiophiles, without the hassle of cutting and fiddling around with your own speaker wire.

Craftec MS45 PRO Monitor Stand  – Pair

Ms45 Pro  Professional studio monitor and speaker stand Made by steel. Steel tray with non-slip rubber to grant stability and vibrations reduction. Locking pin for locking and height adjustment, center safety knob ensure round pipe gripe. Triangular base with under rubber feet insulation.

Features:

  • Height-adjustable stand for studio monitors.
  • Locking pin ensures stable and accurate height positions.
  • Leveling floor isolation rubber feet included.
  • Low-profile base can be easily positioned into tight spaces

Specifications:

  • Adjustment Of Stands Locking Height: 32.25, 36.25, 40.25″, 44.25″ (819mm, 920 Mm, 1022mm, 1124mm)
  • Top Platform Dimensions: 9″ X 9″ (229mm X 229mm)
  • Stand Floor Base Dimensions: 17.25″ X 17.25″ X 17.25″ (438mm X 438mm X 438mm)
  • Weight: 3.9 Kg
  • Weight Capacity: 26 Kg

Samson MS100 Studio Monitor Stands

Each MS100 features a telescoping design, which is height adjustable between 30 and 50 inches. The MS100 stand features a heavy base with carpet spikes for stability, and a vise-style 140 x 270 mm speaker bracket, which will fit most small-medium sized studio monitors.

Samson MS100 Features:

  • Professional-grade isolated studio monitor stands
  • Telescoping column for height adjustment
  • Adjustable vise-style speaker bracket fits most studio monitors
  • Heavy base with carpet spikes
  • Ideal for Auro 3, 5 & 6, Resolv 40a, Resolv 50a, Resolv 2.1 and Rubicon 5a Monitors.

Vault Control 1 Passive Stereo Monitor and Volume Controller

The Vault CONTROL-1 is a miniature console to control the level of your computer’s audio to powered monitor speakers. Featuring all passive circuitry with an uncluttered signal path to avoid coloration the unit simply connects between your desktop computer, laptop or audio interface and loudspeakers.

Video Showing Unboxing for the Vault Control 1!

Have a complete look at Control 1!

Vault Control-1 Passive Monitor Controller Studio Setup With Vault Ai22 Audio Interface

Combo sockets enable balanced input on XLR or 6.35 mm TRS connectors, the L/R stereo output is onXLR connectors. The CONTROL-1 also provides unbalanced 3.5 mm stereo input and output to accomodate consumer equipment.For additional convenience, the unit incorporates an output mute switch and a mono switch to sum the left and right stereo channels.With sides of solid wood, a powder coated steel enclosure and non-slip rubber feet the CONTROL-1 is a highly useful tool in the studio and at home… and it’s an eyecatcher, too!CONNECTING AN AUDIO INTERFACEIf your audio interface provides XLR or 6.35 mm TRS outputs use high quality shielded patch or microphone cables for balanced connection to the CONTROL-1 ’s L/R combo inputs.NOTE: TO PREVENT POPS AND CRACKLING NOISES MAKE SURE YOUR MONITOR SPEAKERS ARE SWITCHED OFF BEFORE CONNECTING THE CONTROL-1.•Connect the L/R outputs of your interface to the CONTROL-1 L/R inputs.•Connect the CONTROL-1 L/R outputs to your monitors.•Set your computer’s audio output level to maximum and your software master volume to 0 dB.•Set the C0NTR0L-1’s attenuation control fully counterclockwise.•Switch on your monitors.•Make sure the C0NTR0L-1’s mute function is deactivated and bring up the volume by rotating the attenuation control clockwise.Stereo inputs:L/R combo sockets for balanced XLR or 6.35 mm TRS input plus 3.5 mm TRS jack. To prevent ground loops do not use the combo sockets and 3.5 mm jack simultaneously.Stereo outputs:L/R XLR sockets plus 3.5 mm TRS jack. To prevent ground loops do not use the XLR sockets and 3.5 mm jack simultaneously.Mono:Pressing this switch feeds a mono sum of the left and right stereo channels to all outputs.Pressing this switch mutes all outputs.Attenuation:This knob controls the output level to your monitor speakers.Specifications:

  • Product Type: monitor controller passive
  • Type: Passive
  • Number of Input: 2
  • Number of Channels: 2
  • Inpu Connections: XLR-TRS combo/3.5 mm stereo TRS
  • Input Type: balanced / unbalanced
  • Maximum Input Level: +20 dBu
  • Input impedance: 10k balanced /5k unbalanced
  • Number of Input: 2
  • Output connections: XLR/m, 3.5 mm stereo TRS
  • Output Type: Balanced / unbalanced
  • Max Output: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10 Hz – 40 kHz +/-1dB
  • THD: 0,001%
  • Max. attenuation: 85 dB (attenuator) 112 db (attenuator + mute)
  • Control: Attenuation, Mute, Mono
  • Housing material: Sheet steel / genuine solid wood
  • Housing Surface: powder-coated
  • Dimensions: 164 mm x 85 mm x 62 mm
  • Weight: 690 g

Mackie Big knob Passive Tabletop Studio Monitor Controller

Studios of any size can benefit from the professional source/monitor selection and precise level control of the Big Knob Series. Plus, with the addition of high-resolution Onyx USB recording and playback, studios get a powerful, hybrid solution that is truly greater than the sum of its parts. 

MORE

THAN MEETS THE EYE

Sure, we all know the Mackie Big Knob is the go-to monitor controller for studios the world over. But, now that we’ve added in the high-resolution goodness of an Onyx recording and playback solution, Big Knob truly becomes the nerve center for your studio. Or, if you are looking for excruciatingly simple volume control/monitor switching, the Big Knob Passive delivers at an amazing price. No matter what size studio, Big Knob is always at the top of the recording studio equipment shopping list.

Features:

PRO SOURCE AND MONITOR SELECTION

The Mackie Big Knob has proven itself for more than a decade as the go-to monitor controlling solution for home and professional studios. The all-new Big Knob family takes the best of this classic workflow, delivering the right solution for the modern studio. 

PREMIUM ONYX RECORDING/PLAYBACK

Both the Big Knob Studio and Big Knob Studio+ offer high-resolution USB interfacing at resolutions up to 192 kHz, featuring dual Onyx mic preamps, delivering an ultra-wide 60 dB of gain range and award-winning sound quality. 

FLEXIBLE INTEGRATION

The expanded Big Knob lineup offers models with unique feature sets and I/O to suit a huge range of applications. Features like dual headphone outs, a dedicated amp-driven studio out, a true cue mix and more ensure Big Knob will fit right into your studio or workspace. 

PRO TOOLS | FIRST DAW

An industry standard for decades, Pro Tools | First is easy enough for beginners yet sophisticated enough for experienced musicians. Get many of the same tools used by your favorite artists and recording studios. And now you can collaborate online with anyone, anywhere, and create at the speed of your imagination. Available for MacOS and Windows operating systems. Learn More

WAVEFORM OEM DAW

Waveform OEM is a multi award-winning workstation, featuring powerful and creative tools to inspire the modern musician. Unlike typical ‘Lite’ versions, it does not impose any restrictions – you get unlimited track count, powerful features, compatibility with all popular plug-ins and efficient performance on MacOS, Windows, and Linux operating systems. Learn More

DAW ESSENTIALS COLLECTION

Introducing a collection of 16 contemporary FX plug-ins for use with any DAW. These plug-ins utilize the very latest algorithms and coding techniques to deliver extraordinary sound quality in an extremely efficient package, allowing the plug-ins to be used liberally across a wide range of native computer systems. Learn More

 *Note: Above Component Product Description is applicable as per variant selection 

Additional information

Cable

TRS to XLR 3m, TRS to TRS 1.5m, NONE
Monitor Stand

Samson MS100, Craftec MS45 PRO, NONE
Monitor Controller

Vault Control 1

Related products

Vault C6 6" Powered Studio Monitors Pair - Test

Add to cart