sE Electronics DM2 TNT Active Inline Microphone Preamp Overview:

The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone.

Whether you’re a podcaster recording engineer or running live sound sE inline preamps are the perfect way to boost the signal from a passive mic reduce the likelihood of interference and provide significantly improved level to your preamp – all without adding noise or coloration. 

Reliable operation even in demanding on-stage applications in difficult environments is ensured by a roadworthy and slim all-metal design robust construction and high-quality manufacturing standards.

Switchable clean and consistent gain from moderate +15dB to explosive +30dB

• Designed for neutral balanced sound quality with minimal noise
• Explore eight settings ranging from an unconventionally low 50 ? to stunningly high 10 M? to match your preamp with any mic accurately
• Two gain levels for even higher flexibility on various sources
• Ruthlessly boosts the signal independent from load impedance or cable length

Sophisticated Class-A Electronics

• State of the art electronics and high-grade FETs provide supremely low noise
• Transformerless design for pristine sound quality
• Provides the lowest noise in its class

Dedicated Output Buffer Amplifier

• Provides +28dB or +15dB / +30dB output independent of load impedance or cable length
• Extremely low output impedance
• Drives long cable runs and can reduce susceptibility to RF interference buzz & hum

Slim Rugged All-Metal Housing With Premium Finish

• Efficient rejection of any electrical interference and noise
• High-quality finish ensures a great look for many years
• Slim design allows for easy placement in the studio or on stage

Specifications:

• Frequency Range: 10 Hz – 120 000 Hz (-0.3 dB)
• Gain: 15 dB / 30 dB
• Max output level (0.5% THD): 9.5 dBV (3.0 V)
• Output noise level: 1 ?V @ 15 dB / 6.6 ?V @ 30 dB
• Powering: 48 Volts according to IEC 61938
• Electrical impedance: 135 Ohms
• Recommended load impedance: >1k Ohms
• Current consumption: 3.1 mA
• Connectivity: 3-pin male/female XLR connector
• Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)
• Weight: 80 g

System Requirements

Requirements

• Input: passive microphone (ribbon/dynamic)
• Output: preamp/mixer/audio interface providing 48V phantom power

Limitations

• Not suitable for phantom-powered microphones (condenser microphones active ribbon microphones)

In The Box

• DM2 TNT
• sE Logo Sticker
• User manual with warranty card